Fine Water beam

Discussions about RealFlow | Cinema 4D
julmer
Posts: 3
Joined: Thu Jul 14, 2016 6:24 am

Fine Water beam

Postby julmer » Thu Jul 14, 2016 6:29 am

Hello,

I am a Realflow Beginner and use the new Realflow for Cinema 4D Plugin. I try to create a fine water beam like this on the picture. Can help me anyone with the settings?

Regards,

Jochen
Attachments
hybridknife-156374_1b.jpg
hybridknife-156374_1b.jpg (134.49 KiB) Viewed 728 times


User avatar
ChristianZ
Posts: 3253
Joined: Sat Sep 09, 2006 11:37 am
Location: CH

Re: Fine Water beam

Postby ChristianZ » Thu Jul 14, 2016 8:59 am

Hi

I have moved the topic to the correct sub-forum (the use of the RF for C4D plugin is rather different from the standalone application).

I think, such a beam that disintegrates completely in single droplets could also be done by standard particles, since there is now liquid flowing somewhere after the beam hits the target. Anyway, I would recommend to reduce viscosity but use a high resolution for this project so that the beam looks like a solid line.
RF10 standard, System specs: OSX 10.11, MacPro 4.1 2xXeon, GTX980Ti, 64 GB RAM

User avatar
ChristianZ
Posts: 3253
Joined: Sat Sep 09, 2006 11:37 am
Location: CH

Re: Fine Water beam

Postby ChristianZ » Thu Jul 14, 2016 9:23 am

Something like that should do the trick:
Image
RF10 standard, System specs: OSX 10.11, MacPro 4.1 2xXeon, GTX980Ti, 64 GB RAM

julmer
Posts: 3
Joined: Thu Jul 14, 2016 6:24 am

Re: Fine Water beam

Postby julmer » Thu Jul 14, 2016 7:13 pm

Thank you very much for the help. I try it and give feedback.


Return to “RealFlow | Cinema 4D”

Who is online

Users browsing this forum: No registered users and 1 guest