dyverso problem

Describe your realflow bugs
mikinik
Posts: 11
Joined: Tue Aug 18, 2015 8:05 pm

dyverso problem

Postby mikinik » Mon Sep 07, 2015 12:13 am

hi!
there are problems in dyverso daemon, will this be fixed??
dyverso is very bad working with the filter daemon, after the execution of the conditions of the particles do not interact with each other. on the attached picture 1 and video it can be seen. there is also a big problem with the volume mode. if you change it to the solid outside, and pressing the reset button, particles fill volume is not correct, pictures 2, 3. also like to know whether additional attributes are added to the conditions for a filter daemon if it works with dyverso?

https://www.dropbox.com/s/704a9wmj0xywv ... g.avi?dl=0
DYBug_1 copy.jpg
DYBug_1 copy.jpg (233.35 KiB) Viewed 1227 times



DYBug_2.jpg
DYBug_2.jpg (230.31 KiB) Viewed 1227 times


DYBug_3 copy.jpg
DYBug_3 copy.jpg (227.49 KiB) Viewed 1227 times


User avatar
ChristianZ
Posts: 3266
Joined: Sat Sep 09, 2006 11:37 am
Location: CH

Re: dyverso problem

Postby ChristianZ » Mon Sep 07, 2015 10:12 am

Hi
just had a quick look at dyverso system until now. Question: could the filter issue you described be related to the current limitation of the dyverso system that 2 domains cannot interact with each other?
RF10 standard, System specs: OSX 10.11, MacPro 4.1 2xXeon, GTX980Ti, 64 GB RAM

mikinik
Posts: 11
Joined: Tue Aug 18, 2015 8:05 pm

Re: dyverso problem

Postby mikinik » Mon Sep 07, 2015 11:14 am

I also wonder this, this limitation or bug?

User avatar
Oldcode
Posts: 762
Joined: Thu Nov 03, 2011 11:28 pm

Re: dyverso problem

Postby Oldcode » Mon Sep 07, 2015 9:11 pm

I don't have 2015 yet, but I saw a tutorial where in order to make two fluids from two different emitters react with each other, the guy drew the relationship directly to each other and have the arrows between the two emitters both ways.

Don't know if this is right or not, but that's the first thing that came to mind when I read your question.

Good Luck,
"My sword and my service are yours."

"Then forever remind him of his vow, Knight of the Old Code."

User avatar
ChristianZ
Posts: 3266
Joined: Sat Sep 09, 2006 11:37 am
Location: CH

Re: dyverso problem

Postby ChristianZ » Mon Sep 07, 2015 9:42 pm

That's correct. One domain can have several emitters that can interact with each other, but the properties of the fluid are linked to the domain, so all emitters produce liquids with the same density etc.
RF10 standard, System specs: OSX 10.11, MacPro 4.1 2xXeon, GTX980Ti, 64 GB RAM

mikinik
Posts: 11
Joined: Tue Aug 18, 2015 8:05 pm

Re: dyverso problem

Postby mikinik » Mon Sep 07, 2015 9:59 pm

Oldcode no, they can not unite. I can unite only emitter and domain. HristianZ rights, dyverso domains can not interact with each other, it's a pity.((


Return to “Realflow bug report”

Who is online

Users browsing this forum: No registered users and 1 guest